PolyDL-lactide-co-glycolide

PLGA 50:50

Synonyms:  Poly(DL-lactide-co-glycolide) 50:50
CAS No: 26780-50-7
Appearance: Pale yellow particle
End Group: Acid, Ester and Hydroxyl group for options
Minimal order quantity: 30 gram

FAQ

Most frequent questions and answers

PLGA 50:50 has the fastest degradation rate among PLGA copolymers because it has an equal balance of lactic acid and glycolic acid units. The higher glycolic acid content increases hydrophilicity, making it more susceptible to hydrolysis.

The glass transition temperature (Tg) of PLGA 50:50 typically ranges between 40°C and 55°C, depending on molecular weight and processing conditions.

PLGA 50:50 can be synthesized with either acid-terminated or ester-terminated end groups, and the choice significantly impacts its properties and performance.

  • Acid-terminated PLGA has greater hydrophilicity and a faster degradation rate due to increased water uptake, making it suitable for controlled drug release applications where a shorter degradation timeframe is needed.

  • Ester-terminated PLGA is more hydrophobic, leading to slower degradation and better mechanical stability, which is beneficial for applications requiring prolonged structural integrity, such as implantable medical devices.

PLGA 50:50 is soluble in a variety of organic solvents, depending on the intended application. Some commonly used solvents include:

  • Halogenated Solvents: Chloroform, Dichloromethane (DCM) – These are the most commonly used solvents for dissolving PLGA, offering good solubility and compatibility for drug delivery formulations and film casting.

  • Esters: Ethyl Acetate, Acetone – These provide moderate solubility and are sometimes preferred due to their lower toxicity compared to halogenated solvents.

  • Alcohols: Methanol, Ethanol – Limited solubility, but can be used in specific applications, especially for nanoparticle synthesis when mixed with other solvents.

  • Other Solvents: Tetrahydrofuran (THF), Dimethyl Sulfoxide (DMSO), Dimethylformamide (DMF) – These solvents work well for certain biomedical and electrospinning applications.

PLGA 50:50 is widely used in various processing techniques, depending on the intended application and material properties. Some common processing methods include:

  • Electrospinning: PLGA 50:50 can be dissolved in solvents like chloroform, DCM, or HFIP and electrospun into nanofibers for tissue engineering, wound healing, and drug delivery applications.

  • Solvent Casting: This method involves dissolving PLGA in a solvent (e.g., chloroform, ethyl acetate) and casting it into thin films or coatings for biomedical applications such as drug-eluting films.

  • Injection Molding: PLGA 50:50 can be processed via thermal molding, although it requires precise control due to its thermal sensitivity. It is used to manufacture implants, scaffolds, and bioresorbable medical devices.

  • 3D Printing: In fused deposition modeling (FDM) or stereolithography (SLA), PLGA can be processed into printable filaments or used in bio-inks for tissue engineering scaffolds.

  • Microparticle and Nanoparticle Formulation: PLGA 50:50 is commonly used in emulsion-solvent evaporation or spray drying techniques for drug delivery systems, enabling controlled release of pharmaceuticals.

The degradation time of PLGA 50:50 in biological environments depends on several factors, including molecular weight, end-group chemistry (acid-terminated vs. ester-terminated), processing method, and environmental conditions such as pH and temperature.

The residual monomer content in PLGA 50:50 refers to the unreacted lactide and glycolide monomers that remain in the polymer after polymerization.

For PLGA 50:50, the packaging options typically depend on the quantity required, storage conditions, and intended use (e.g., industrial, pharmaceutical, or research). Common packaging options for PLGA 50:50 include:

  • Vacuum-sealed bags: These are commonly used for smaller quantities or research-grade materials. Vacuum sealing helps protect the polymer from moisture and oxidation, which can degrade its quality.

Yes, bulk supply of PLGA 50:50 is generally available for industrial production. Manufacturers typically offer large-scale quantities of PLGA 50:50 to meet the needs of industries such as pharmaceuticals, biotechnology, medical devices, and tissue engineering.

Yes, Certificates of Analysis (COA) and Material Safety Data Sheets (MSDS) are typically provided with orders of PLGA 50:50 or any other polymer products.

Let’s get started

Speak with one of our biodegradable materials experts today.